Event ID 2002 Perflib
Posted: Mon Jul 31, 2006 5:45 pmStarting a Windows 2000 Server
Event Log shows this error
ISSUE
Event ID 2002
PerfLib
I found a solution at http://support.citrix.com/article/CTX587401
The open procedure for service "PerfDisk" in DLL "C;\WINNT\System32\perfdisk.dll has taken longer than the established wait time to complete. There may be a problem with this extensible counter or the service it is collecting data from or the system may have been very busy when this call was attempted.
CAUSE
This error occurs after a reboot of the server because Resource Manger is attempting to query counters of a service(s) that have not yet started.
RESOLUTION
Adjust the following registry value.
WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Citrix cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.
HKLM\System\CurrentControlSet\Services\PerfDisk\Performance\OpenTimout
The current value in decimal is 5000. Change the value to 35000.
This will change the delay from 5 seconds to 35 seconds before Resource Manager attempts to collect data.
My Value in decimal 5000
I have changed it to
35000
Event Log shows this error
ISSUE
Event ID 2002
PerfLib
I found a solution at http://support.citrix.com/article/CTX587401
The open procedure for service "PerfDisk" in DLL "C;\WINNT\System32\perfdisk.dll has taken longer than the established wait time to complete. There may be a problem with this extensible counter or the service it is collecting data from or the system may have been very busy when this call was attempted.
CAUSE
This error occurs after a reboot of the server because Resource Manger is attempting to query counters of a service(s) that have not yet started.
RESOLUTION
Adjust the following registry value.
WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Citrix cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.
HKLM\System\CurrentControlSet\Services\PerfDisk\Performance\OpenTimout
The current value in decimal is 5000. Change the value to 35000.
This will change the delay from 5 seconds to 35 seconds before Resource Manager attempts to collect data.
My Value in decimal 5000
I have changed it to
35000