Page 1 of 1

A working ADSL config for SR520

PostPosted: Sun Nov 14, 2010 5:27 am
by stephen
This config obtained from web
Please note the word callin at the line
ppp authentication chap pap callin
I originally did not have that word and my modem would not connect to my ISP.

Code: Select all
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
pvc 0/38
  pppoe-client dial-pool-number 1
!
!
interface Dialer1
description $FW_OUTSIDE$
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly
zone-member security out-zone
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname <username>@hg43.btclick.com
ppp chap password <password>
ppp pap sent-username <username>@hg43.btclick.com password <password>
ppp ipcp dns request